Rubber Wheel Stop – 1650mm Car Park Stop

Reliable Perimeter & Vehicle Protection for Car Parks

Over-parking and vehicle encroachment can cause severe damage to low-lying building facades, garden beds, perimeter fencing, and shared walkways. The 1650mm Commercial Rubber Wheel Stop provides a dependable physical parking guide designed specifically for passenger vehicles, commercial fleet bays, and residential parking facilities.

Moulded from heavy-duty recycled vulcanised rubber, it provides substantial structural advantages over traditional concrete kerbing. Its flexible composition contours naturally to undulating asphalt or uneven concrete slabs, while absorbing vehicle contact to prevent cosmetic damage to vehicle front splitters, spoilers, and low-clearance bumper bars.

Key Design Features

• Vehicle-Friendly Recycled Rubber: Unlike rigid precast concrete that chips, spalls, and shatters vehicle bodywork, dense rubber flexes slightly under pressure to cushion accidental impacts.
• High-Visibility Night Reflection: Embedded chevron-style yellow reflective panels provide sharp contrast against bitumen and concrete surfaces, guiding drivers accurately into bays in low-light and covered basement environments.
• Weather & UV Resilient: Manufactured to resist oil spills, fuels, road salts, and sustained Australian sun exposure without cracking, rotting, or fading.
• Single-Person Installation: Significantly lighter and easier to transport than heavy pre-cast concrete alternatives, eliminating the need for lifting machinery and lowering onsite installation labour.

Recommended Site Applications

• Retail & Shopping Centres: Defining perimeter bays and protecting pedestrian walkways, trolley corrals, and glass shopfronts.
• Commercial & Office Complexes: Preventing fleet and staff vehicles from nudging structural columns, cladding, and boundary fences.
• Apartment & Multi-Residential Garages: Safeguarding internal storage cages, service pipework, and dry-wall partitions from low-speed bumper contact.
• Commercial Drive-Thrus & Service Lanes: Channelling traffic flow safely through narrow service corridors and ordering bays.

Fixing & Substrate Guide

Because ground substrates vary significantly from site to site, mounting fasteners are sold separately. We recommend using the following hardware depending on your surface:

• Concrete Slabs: 150mm M10 concrete screw anchors with heavy-duty penny washers.
• Asphalt / Bitumen: 300mm M12 threaded road asphalt anchors with structural epoxy or washers.
• Compacted Gravel: 300mm heavy-duty road spikes.