Find a product...

Search For Products


Search Products

Search For Products


Search Products

Relocations & lease make-good

Pallet Racking Relocation, Removal & Lease Make-Good

Moving warehouses or coming up to the end of your lease? We dismantle, transport and re-install your racking across Greater Geelong, Ballarat, the Surf Coast and Western Melbourne, and coordinate the slab make-good so your landlord handover goes smoothly.

At a glance

2026~10~decomission

Two jobs we handle

Moving to a new warehouse

We pack down your racking in stages, move it, and rebuild it to a new CAD layout at your new site, re-certified to AS 4084.

Leaving a site for good

We dismantle and remove the racking, then coordinate the slab repairs your lease requires so you get your bond back. [If you buy back unwanted racking, say so here.]

Hand back a slab your landlord will sign off

Commercial leases in Victoria usually include make-good clauses that must be met before your bond is released. Protruding anchors, spalled concrete or a damaged slab can mean delayed bond returns, disputes and deductions from your landlord.

Our crews handle the de-rigging, dismantling and bundling. We also coordinate trusted commercial concrete specialists to carry out the slab remediation for you.

Anchor bolts

THE USUAL PROBLEM

Cut above slab height, leaving sharp snags and jagged edges.

OUR MAKE-GOOD STANDARD

Sheared below the slab surface or cored out completely for a flush, trip-free finish.

Slab repairs

THE USUAL PROBLEM

Holes filled with silicone, foam or mortar that crumbles.

OUR MAKE-GOOD STANDARD

Holes vacuumed clean and filled with high-strength, non-shrink epoxy grout.

Wall and column fixings

THE USUAL PROBLEM

Broken dynabolts, brackets and torn plaster left at tie-backs.

OUR MAKE-GOOD STANDARD

Fasteners and wall fixings removed, surfaces patched ready for inspection.

Waste and scrap

THE USUAL PROBLEM

Timber, bent bracing and sheared hardware left in the yard.

OUR MAKE-GOOD STANDARD

Full site sweep and haulage, with damaged steel recycled off-site.

Move without stopping your operation

Relocating a live warehouse takes careful scheduling. We don’t just strip steel; we stage the move to keep picking bays open as long as possible. Whether you’re moving next door in North Geelong or fitting out a new distribution centre in Derrimut or Truganina, we handle every phase.

Dismantling, bundling & transport

Bay numbering

Frames, beams and shelf levels tagged to match your new floor plan.

Safe de-rigging

Carried out by licensed scissor lift and boom operators under high-risk work procedures.

Strapped and transported

Frames and beams bundled, strapped and loaded onto flatbeds.

Re-installation & AS 4084 re-certification

Laser set-out

Chalk lines set from the building's column grid for square, straight aisles.

New slab anchors

Footplates anchored into fresh positions with compliant fixings.

Sign-off

Components inspected after the build, with certified Safe Working Load signs supplied.

How it works

1

Audit & new layout

We inspect your racking to confirm it’s fit to reuse, and draw a 2D CAD layout for the new site to suit your forklifts.

2

Staged dismantling

Our crews offload, unpin, dismantle and bundle in stages, keeping your critical stock lines accessible.

3

Transport & re-install

Materials are moved to your new site, set out to the approved plan, shimmed level and anchored.

4

Make-good & handover

At the old site, anchors are removed or flush-cut and the slab patched with epoxy grout, ready for landlord sign-off.

Upgrade while you move

Moving is the best time to expand

A new building often means higher ceilings or a different column layout. Because we stock racking in North Geelong, we can supply matching uprights, extra beam levels, frame splices and safety mesh as your installation goes up, without holding up the project.

Where we work

Geelong & Bellarine

Our home base in North Geelong

Surf Coast

Torquay, Anglesea, Winchelsea and more

Ballarat & Golden Plains

Wendouree, Delacombe, Bannockburn and more

Western Melbourne

Werribee, Truganina, Derrimut and more

Frequently asked questions

Yes. We dismantle and re-install most major brands, and supply compatible parts if anything is damaged.

Yes. We inspect every component after re-installation and supply certified Safe Working Load signs to AS 4084.

We coordinate trusted commercial concrete specialists for the slab work, so you deal with one team for the whole make-good.

Yes, we can work around your operating hours with advance planning. Please note that scheduling outside standard business hours may incur additional fees depending on the timing and scope of the work.

As soon as you know you require relocating.

We offer a buy-back option for surplus racking, subject to inspection, current market demand, and an agreed-upon valuation. Please note that buy-backs are evaluated on a case-by-case basis and are not guaranteed.

Get a relocation quote

Tell us about your move or lease end, and we’ll arrange a site inspection.

Name
My review

Review Details
Your cart
Add note for seller
Shipping Details
Select or input Coupon